Rugao Leheng Chemical Co., Ltd. was founded in June 2001 and is located in the Rugao Port Economic Development Zone, Jiangsu Province, at the center of the Yangtze River Delta. With well-developed transportation and outstanding talents, it is known as the international hometown of longevity. The company specializes in the production and sales of pyromellitic dianhydride (PMDA), with an annual output of 1200 tons (crystallization method) and 600 tons (sublimation method). The products are mainly used for the production of polyimide film (PI). At present, the market sales cover large PI enterprises in the United States, South Korea, Japan, as well as domestic high-end PI enterprises and polyimide fiber enterprises.
The company specializes in the production and sales of pyromellitic anhydride (PMDA)
Product application: pyromellitic dianhydride Main applications: polyimide film, polyimide resin, high temperature resistant electrical insulating paint, PVC plasticizer, synthetic resin crosslinker, epoxy resin curing agent, powder coating matting agent, etc.
Product application: polyimide film, polyimide resin, high temperature resistant electrical insulating paint, PVC plasticizer, synthetic resin crosslinker, epoxy resin curing agent, powder coating matting agent, etc.
More comprehensive, convenient, and timely understanding of Leheng news and industry trends!
It mainly includes three categories: plastic, chemical fibers, and rubber. There are many types of synthetic materials among them, which are made from monomers produced by petrochemical industry through polymerization reactions. Some have special properties that natural materials cannot achieve and are widely used in industrial and agricultural production and daily life, so they have developed rapidly. In the 1930s, the world's production of polymer materials did not exceed 100kt, but by the 1980s it had reached about 80Mt, with plastics accounting for 3/4. Due to the fact that plastic is lighter than metal, its production by volume has already surpassed that of metal materials.
Curing agents can be divided into room temperature curing agents and heating curing agents according to their use. Epoxy resin generally has excellent performance during high-temperature curing, but coatings and adhesives used in civil construction require room temperature curing due to heating difficulties; So most of them use fatty amines, alicyclic enantiomers, and polyamides, especially in winter when coatings and adhesives have to be used in combination with polyisocyanates, or when using odorous polyols.
Fine chemical industry is a general term for the production of fine chemicals, abbreviated as "fine chemical industry". The meaning of fine chemicals is still under discussion abroad. Chemical products with the following characteristics are commonly referred to as fine chemicals, namely:
(1) Consider the variety and performance of curing agents. The variety of curing agents has a significant impact on the mechanical properties, heat resistance, water resistance, corrosion resistance, etc. of the cured product. For example, curing agents such as aromatic polyamines, imidazole, and anhydride have a higher heat resistance than curing agents such as aliphatic polyamines and low molecular weight polyamides in curing epoxy resins; The water resistance of aromatic anhydride cured epoxy resin is better than that of aromatic diamine and aliphatic polyamine curing agents; Triethylenetetramine curing agent has good alkali resistance, but poor acid resistance and formaldehyde solution resistance. The resistance of epoxy resin cured with alicyclic polyamines (such as isophorone diamine) is excellent. The alkali resistance of epoxy resin cured with anhydride curing agent is superior to acid resistance. Appropriate curing agents should be selected based on different applications and performance requirements.