Warm congratulations on the website launch of Rugao Leheng Chemical Co., Ltd!

Curing agents can be divided into room temperature curing agents and heating curing agents according to their use. Epoxy resin generally has excellent performance during high-temperature curing, but coatings and adhesives used in civil construction require room temperature curing due to heating difficulties; So most of them use fatty amines, alicyclic enantiomers, and polyamides, especially in winter when coatings and adhesives have to be used in combination with polyisocyanates, or when using odorous polyols.

Fine chemical industry is a general term for the production of fine chemicals, abbreviated as "fine chemical industry". The meaning of fine chemicals is still under discussion abroad. Chemical products with the following characteristics are commonly referred to as fine chemicals, namely:

(1) Consider the variety and performance of curing agents. The variety of curing agents has a significant impact on the mechanical properties, heat resistance, water resistance, corrosion resistance, etc. of the cured product. For example, curing agents such as aromatic polyamines, imidazole, and anhydride have a higher heat resistance than curing agents such as aliphatic polyamines and low molecular weight polyamides in curing epoxy resins; The water resistance of aromatic anhydride cured epoxy resin is better than that of aromatic diamine and aliphatic polyamine curing agents; Triethylenetetramine curing agent has good alkali resistance, but poor acid resistance and formaldehyde solution resistance. The resistance of epoxy resin cured with alicyclic polyamines (such as isophorone diamine) is excellent. The alkali resistance of epoxy resin cured with anhydride curing agent is superior to acid resistance. Appropriate curing agents should be selected based on different applications and performance requirements.

The curing temperature of the curing agent is closely related to the heat resistance of the cured product. Similarly, in the same type of curing agent, although it has the same functional group, its properties and cured product characteristics also differ due to different chemical structures. Therefore, a comprehensive understanding of the properties and characteristics of polyamine curing agents with the same functional group but different chemical structures is crucial for selecting curing agents.

Plasticizers are usually structurally polar or partially polar, and are liquids or low melting point solids with high boiling points, high volatility, and good miscibility with polymers. Plasticizers are distributed between macromolecular chains, which can reduce intermolecular forces, reduce polymer viscosity, and enhance flexibility. Plasticizers are divided into two categories: main plasticizer and secondary plasticizer. The main plasticizer has a good compatibility with resins, with low permeability and volatility, which can improve plasticization efficiency.